Names And Illustrations Of The Parts Of The Knit Contour

Basic operation of both units is similar. The KR-7 is wider than the KR-6, and it has the capability to knit at both half and full scale.

KR 6 Knit Contour
1. Paper Lever
2. Clip
3. Paper Holder
4. Paper Slit
5. Row Number Window 		6. Row Number Dial
7. Feeding Dial
8. Change Lever
9. Feed Lever
illustration of parts

KR 7 Knit Contour

1. Pattern Paper Lever. Pull towards you and the pattern paper is released and moves freely.

2. Stitch Scale Clip. Insert the stitch scale with the same number as measured on the Tension Swatch.

3. Pattern Paper Slot. Insert a Pattern Paper.

4.Row Number Scale. Indicates the number of rows measured over the Tension Swatch.

5. Row Number Dial. Select the row number to correspond with the number of rows measured on the Tension Swatch.

6. Feeding Dial. Move the pattern paper backwards and forwards manually with this dial.

7. Select Lever. Select the position according to the scale of the pattern.
Half Scale Pattern--1/2.
Full Scale pattern--1/1.

8. Change Dial. Select the position of 30--60, or 61--120 according to the row reading from the Tension Swatch.

Knit Contour Lesson Index

Clearwater Knits Home Page

Irene Woods
P.O. Box 637
Wickenburg, AZ 85358
(928) 684-2969

© 1997-2002 by Irene Woods

Email: irenewoods@clearwater.net