Illustrations of Parts of KR 10/11 Knit Contour

Illustration of Parts of the KR 10/11 Knit Contour

1. Select Lever. Set it to 1/2 or 1/4 scale, depending on pattern.
2. Display. 00 indicates row gauge. It is used while setting row gauge, and is the setting shown in illustration. 0 is the row counter setting. It is used while knitting the garment, and covers 1 to 999 rows. X indicates batteries are worn out and must be changed.
3. Pause Key. Push to lock pattern feeding (number in display disappears.) Push again to unlock (Number in display reappears.)
4. Reset Key. Resets row number to 0.
5. Plus Key. This is used to
- a. Set row gauge. Every time key is pushed, the number increases by 0.5.
- b. Move the pattern forward.
6. Minus Key. This is used to
- a. Set row gauge. Every time key is pushed, the number decreases by 0.5.
- b. Move pattern backwards.
7. Set Key. Used to set and memorize number of rows required.
8. Connecting Cord. Connects Knit Contour to machine.
9. ON/OFF Switch. Display shows "0" when it is on.
10. Feeding Dial. Moves pattern forwards and backwards manually.
11. Paper Stand. Holds pattern up away from case.
12. Clip. Holds Stitch Scale in position.
13. Pattern Slot. Insert pattern here.
14. Stitch Scale.

Irene Woods
P.O. Box 637
Wickenburg, AZ 85358
(928) 684-2969